Air Scrub is a totally new, safe, fast and cost effective way of removing contamination from the air outperforming all other traditional techniques.

The Air Scrub process causes the airborne contaminating to rain or fall out of the air within minutes of application, landing on horizontal surfaces for conventional surface cleaning.

Air Scrub Accredited technicians prove success by measuring airborne decontamination before and after treatment.

What is Air Scrub?

Air Scrub removes all airborne contamination in minutes including:

mould,
soot’s,
asbestos
bacteria
virus
chemicals and odours

The fallen contamination will remain locked in conglomeration for 3 to 5 days for conventional cleaning

This is sanitation by cleaning and removal not biocides.

Customer Comments

After a flood we had some new health problems

We employed Air Scrub who’s technicians arrived and used a particle counter to show me how much dust and debris was in the air.

After they did their treatment I could actually see the air was cleaner and they proved it was with their particle counter.

I have felt so much better since that contamination was removed

Mark Peronski March 2014

Breathing Difficulties in

Air Scrub is a process that removes almost any type of contamination from the air in minutes.

The three stage process causes airborne contamination to negate static energy (Brownian motion) and conglomerate, becoming too heavy to stay airborne and fall to horizontal surfaces and this is removed by conventional cleaning.

Please see a description of Brownian Motion and why conventional cleaning doesn't work (Here)

The patented process is a primary wetting agent that has affinity to particulates and more importantly the secondary process which is absorbed causing the weight of the particulate to become too heavy to remain airborne. The airborne contamination falls within minutes onto sacrificial plastic sheeting or can be removed by conventional cleaning from horizontal surfaces.

The combination of the primary and secondary application produces a synergy which binds to the contamination and the fallen contamination will remain on surfaces for up to 4 days, allowing ample time for removal.

The Air Scrub process is extremely fast and a typical whole house can be decontaminated in less than 2 hours with larger areas benefitting from the use of larger commercial applicator equipment.

Evidence of decontamination is essential and while specific laboratory tests can be provided we provide onsite real time evidence from particle counters and or measurement of VOCs (volatile organic compounds) through a PID (Photo Ionisation Device)

The clean-up of fallen contamination can be undertaken by normal cleaning regimes over 3 or 4 days to reduce costs or we can install sacrificial plastic sheeting for simple folding up and disposal.

Typical Applications

General air decontamination of dust , skin, mites, cockroach or allergens
Mould spores and bacteria endotoxins
Sneeze droplets and general biological contamination
Asbestos fibres
Soot and smoke particulates
Odours and fumes
Demolition and or construction dust
Pollen and yeasts

Evidence it works

Unlike any other system on the market in the Air Scrub system not only cleans the air quickly but the air can actually be seen to be clean

Typically we see particle counts drop from 800ug M to less than 50 within 60 minutes.

Air Scrub can remove indoor air pollution in minutes making traditional methods of filtration and ionisation, ozone and fogging obsolete

Dead mould and bacteria are allergenic or toxic and sub-micron fragments of cell or spore wall become aerosolised and inhaled into the lower respiratory tract and alveoli where blood oxygen transfer occurs.

Applications

Sanitation of flooded buildings
Fire damage and soot’s
Mould decontamination (after surface decontamination)
Building demolition or generally dusty environments